News

Precautions For Using Hydrogen Production Equipment

Feb 12, 2024 Leave a message

1. The external power supply of the equipment is three-phase four-wire 380V. Failure to connect the neutral line will cause the machine to not work, and running without a phase will damage the equipment.

2. Use pure water. Long-term use of unfiltered tap water may block the pipes. It is recommended to use pure water to extend the service life of the machine.

3. The working environment temperature is 0-40℃, and the ventilation is good. It is prohibited to work in a closed environment.

4. The equipment requires that the external power grid has good lightning protection effect. Otherwise, it should be shut down and cut off the power supply when struck by lightning.

5. It is strictly forbidden to use water to flush the equipment. Only clean rags or compressed air can be used to clean the dust inside the machine.

6. When the equipment is started for operation, no smoking or other sources of fire are allowed within 5m of the machine.

7. There is a low-concentration potassium hydroxide (KOH) solution in the working medium of the equipment. If it accidentally splashes into the body, it should be rinsed immediately with vinegar. If the sensitive parts such as eyes are rinsed with water, seek medical attention immediately. Therefore, users should keep a few bottles of edible vinegar on hand at all times in case of unexpected events.

Send Inquiry